SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Vehicle Electronics & GPS / Car Audio / Car Speakers & Speaker Systems
INCLUDES: 2x 12MB1000FT 12" Midbass Loudspeaker - 2000 Watts package - 1000 Watts each speaker FEATURES: For
high output speaker systems, PRV Audio’s 12MB1000FT mid bass is an
excellent option capable of amazing performance. A great new addition to
the Forte Series, where more power handling and less distortion on mid
low mid bass frequencies is the key. All
this attention to detail in the 12MB1000FT makes it one impressive
driver. With 97.5 dB efficiency and 1000 watts of continuous program
power (RMS), this mid bass is ideally suited to be used as a stage
monitor, or in auditorium, touring and outdoor systems. Also, its smooth
response from 70 to 3,200 Hz makes it perfect for 2 or 3-way designs. Highlights
3″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 8 ohms
Ventilated voice coil gap reduces power compression
High Xmax for more Midbass output
1,000 watts continuous program power rating makes high acoustical output
Excellent performance in 2-way or 3-way systems
Weather-resistant paper cone and dust cap
Also Available at
4 Ohm.
A
rigid cast aluminum frame with narrow spokes to minimize reflections
back into the cone. In addition, the frame includes force cooling system
openings which allows airflow to cool the voice coil. To
drive the voice coil, a large ferrite magnet with a very precise
machined top and bottom plate has been used. The additional dual forced
vent in the back plate of the coil allows this driver to handle up to
1000 watts RMS without issue. Features
a special high strength pulp composition paper cone designed to achieve
the best possible linearity within the middle frequency range, which,
together with a protective cone treatment dedicated to enhancing the
dampening properties of the moving assembly, considerably improves its
smooth frequency response. The
voice coil is wound on a 3″ glass fiber with aluminum wire, keeping
weight to a minimum for an incredibly quick transient response.
Engineered with 19 mm of winding depth, this inside/outside voice coil
provides excellent thermal and mechanical durability. GENERAL SPECIFICATIONS Nominal Diameter 12″ (310 mm) Nominal impedance 8 Ohm Nominal Power Handling * 500 Watts Continuous Program Power (RMS)** 1000 Watts Max Peak Power*** 2000 Watts Sensitivity 2.83V at 1m97.5 dB Recommended Hi Pass Crossover For Full Power Handling 110 Hz 12db Per Octave Crossover Frequency Response70 – 3,200 Hz Voice Coil Diameter 3″ (76 mm) Voice Coil Wire Aluminum Voice Coil Winding Depth 19.0 mm Former Material Glass Fiber Magnetic Gap Depth 10.5 mm Frame Material Die Cast Aluminum THIELE-SMALL PARAMETERS Equivalent Volume Vas 74.57 l Excursion (mathematical)*** Xmax 6.87 mm Free Air Resonance Fs 52.72 Hz Mechanical Factor Qms 13.35 Electrical Factor Qes 0.38 Total Factor Qts 0.37 Cone Area Sd 573 cm² Mechanical Mass Mms 55.94 g Bl Factor Bl 16.54 Tm Dc Resistance Re 5.7 Ohms Inductance Le 1.00 mH at 1 kHz Mechanical Mass Without Air Mmd 48.19 g Mechanical Compliance Cms 0.162 mm/N EXTRA INFO Overall Diameter 12.40” (315 mm) Front Mount Baffle Cutout 11.10” (282 mm) Mounting Depth 5.20”(132 mm) Overall Depth 5.76”(146.5 mm) Net Weight 16.8 Lbs (7.62 kg) Shipping Weight 18.2 Lbs (8.25 kg) Carton Dimensions W x L x H 13.5”x 13.5” x 7.0” (343 x 343 x 178mm)
Returns Accepted for this item if it's within 30 Days