Notify me when the price drops
We will email you if we find a lower price on this product!
2x TPT-MR6-4 BULLET 6.5″ Pro Mid Range Bullet Loudspeaker
FEATURES:
TPT-MR6-4 BULLET
TPT-MR6-4 BULLET 6.5” Midrange Bullet Car Speaker 4 Ohm Shallow Mount
Using the latest technology from PRO audio and stadium systems, we have developed this midrange speaker that will fill your vehicle with warm midrange detail regardless of volume!
The large motor and tight suspension of the Pro Audio 6.5″ BULLET SPEAKER adds powerful vocals enough to keep up in the loudest of SPL applications.
If your system is already strong in the highs and lows, a Pair of these loud speakers in your car will really fill out the sound.
Engineered to be efficient without sacrificing power or performance, this driver utilizes an extremely efficient ferrite motor and high temperature voice coil, bringing to you a suitable option to upgrade your system to a high level of performance and SPL output at a reasonable price.
Specs:
500 Watts Max Power
150 Watts RMS Power
Impedance: 4 Ohm
Sensitivity: 94 dB
Frequency Response: 160 – 9,500 Hz
Voice Coil: 1.5”
Shallow Steel Basket with High Strength Ferrite Magnet
Recommended High Pass Filter with TPT-SP4BT DSP:
180 Hz under 250 Watts of Amplifier RMS Power with 18dB Slope
140 Hz under 150 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
Mounting Depth: 2.20”
Mounting Cutout Diameter: 5.75″
Overall Diameter: 6.56″
Weight: 3.40 Lbs
Timpano Compact 1 Channel TPT500 2 Ohms Car Audio Amplifier – 1x 500 Watts at 2 Ohms – Mini Stereo 12 volts Full Range Class D Amp
Small Footprint Technology!
Timpano amplifiers raises power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 80-90% in a compact Class D full range amplifier.
Additional Information:
Number of Channels: 1
Max Dynamic Output: 500 Watts RMS 2 Ohm
380 Watts RMS Power at 2 Ohm 12.6 Volts
150 Watts RMS Power at 4 Ohm 12.6 Volts
Supply Voltage: 10 ~ 15V
Frequency Response: 10Hz ~ 22KHz
LPF – Crossover Low Pass: 60Hz to 22,000 Hz
HPF – Crossover High Pass: 10Hz to 700 Hz
Signal to Noise: > 90 dB
Harmonic Distortion: < 0.9 % THD
Input Impedance: 10K Ohm with RCA and 38K Ohm with Wires
Impedance Output: 2 Ohm
Consumption with Signal Musical: 1A ~ 18A
Dimensions (L x W x H): 3.93” x 5.02” x 2”
Weight: 1.12 Lbs
You must follow the instructions for the product’s installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:
• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier;
• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference;
• Always use 100% Cooper cables and good quality connectors. This guarantees the sound’s quality and fidelity;
• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a fuse 12 inches away from the battery as a safety precaution
The power rating data is based on equipment from the PRV Audio Group laboratory. Rated power tested with 100Hz to 1KHz sinusoidal signal and THD <= 10%, with resistant load referring to the indicated measurements. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended.